This series is mainly used for cutting hard and brittle materials such as crystal, artificial gem,monocrystalline silicon, ceramics, glass, precious metal and magnetic materials. It has a precise temperature control system, high slice precision, small warpage, stable slice quality and low cutting cost.
| Item | Detail | Parameters |
| Ability | Max work size | 165mmX600mmX130mm |
| Roller | Component | Resin(PE or PU) |
| Workable diameter | 160mm≤Φd≤180mmx2 | |
| Diamond wire diameter | Φ0.12mm-Φ0.25mm | |
| Storage | 30km(Φ0.25mm) | |
| Wire Running | Running speed | max1800m/min |
| Repeat rate | max 12 times/min | |
| Running direction | Bidirectional | |
| Workbench | Lift stroke | max 220mm |
| Lift speed | 0.1-999.9mm/hour | |
| Mortar&Fluid | Storage | 83L |
| Flow rate | 170L/min | |
| Control Devices | System | SIMENS |
| Touch screen&PLC&Motion controller | ||
| Motor Power | 9 Servo Motor | 63.2kW |
| Mortar Motor | 3.8kW | |
| Refrigerator | 3.5kW | |
| Power&Air Supply | Power | AC380V Three-phase four-wire system |
| Power consumption | ≤35 kW | |
| Air supply | Air pressure≤0.4Mpa | |
| Size&Weight | Size | 3710mm×2290mm×2660mm |
| Weight | 7500kg | |
